top of page
Art. 620 - Trapezoidal Sheet Hanger (Electro-galvanised)
 

Art. 620 - Trapezoidal Sheet Hanger (Electro-galvanised)

  • Application

    • Trapezoidal sheet hanger.
    • Fastening element for installation to trapezoidal section sheet.
    • Fastening by means of push-through mounting with M8 threaded rod. 
    • Also possible with Ø4.0mm AlMg 5 sealing rivets (DIN 1725) or 4.2mm drilling screws of case-hardened steel.
    • VdS approval (on request) for fastening pipes up to DN 50.
    • With or without noise insulation elements.

  • Technical Data

    Material: Steel 1.0332 acc. to DIN  EN 10111

    Zinc plating: Electro zinc plated, 8-12μm

    Sound absorption unit: EPDM, black

    Hardness: 45° +/-5° Shore-A

    Temperature range: -50°C to +110°C

    bottom of page